The GE B32-8

The GE B32-8 (also referred to as an 8-32B) marked the start of a new line of locomotives for the builder. The new line did feature some improved mechanics and components but mostly its upgrades were of the unseen variety, such as computer systems and microprocessors. Unfortunately, GE's early "Dash 8" models sold very poorly as it was not until the C40-8 and C40-8W models did the series really take off, and continued with the phenomenally successful "Dash 9" series. Today, you can still find a few of this standard cab design in use on Norfolk Southern, which interestingly purchased most of the units built. Additionally, Amtrak continues to operate a small fleet of wide cab variants of the locomotive. In any event, considering that the model is still relatively new none are yet preserved in museums or at tourist railroads.

The GE B32-8 saw a bit of change to the builder's carbody designs. While the boxy look remained the "Dash 8s" saw sharper lines to the cab and rear flared radiator (which now looks very much like a wing), doing away with the more beveled look of the "Dash 7" and Universal series. The "Dash 8s" also have slightly longer nose than earlier models. Perhaps the most noticeable exterior difference with the locomotive (and all "Dash 8s") was the, roughly 10-foot "bulge" directly behind the cab that gave the roof-line a very irregular shape. This new featured simply housed the dynamic brakes.

The GE B32-8 held the same meaning behind its designation as earlier models. For instance, the "B" referred to the unit having a B-B truck setup (two axles per truck) while the "32" referred to it having 3,200 horsepower (although it was officially listed as only having 3,150 horsepower). The "8" reference simply meant it was a model of GE's "Dash 8" series. Using General Electric's then lastest traction motor, the model 752AF, the very light B32-8 (just 131.45 tons) could produce tractive effort ratings of 65,275 pounds starting and 64,700 pounds continuous. Part of the reason for the unit's lackluster success was likely due to its four-axle design, as by 1984, when the model debuted, railroads were shying away from such setups for main line freight locomotives instead opting for six-axles which allowed for better tractive effort and distribution of weight (thus allowing for decreased track wear).

By the time production had ended on the GE B32-8 in 1989 only 49 units had been built; 45 to NS, 3 to Burlington Northern, and a GE demonstrator. Interestingly, despite these poor sales numbers one can still find these units roaming on NS, who still rosters its original fleet of 45 (numbered 3522-3566). Of note, Amtrak also purchased 20 examples of a variant known as the B32-8WH. Equipped with head-end power (HEP) and appearing as a main line freight locomotive it featuring a wide cab design.

GE B32-8 Production Roster

Owner Road Number(s) Quantity Date Built
Amtrak500-519 (B32-8WH)201991
Burlington Northern5497-54993 (Leased From GE.)1984
General Electric (Demo)832 (B32-8W)11989
Norfolk Southern3522-3566451989

The passenger carrier received its order in 1991 and was called into service wherever needed due to its extra tractive effort.   Amtrak had the fleet numbered 500-519 but the California Department of Transportation has since purchased 501 and 502, renumbering them 2051 and 2052 for use in Amtrak California service. Today, they still remain in regular use with the rest of Amtrak's original fleet relegated to yard and switching duties as newer models have since bumped them from main line service.   Lastly, for more information about the B32-8 and a complete production roster, including variants, please refer to the chart above.

Related Reading You May Enjoy

Share Your Thoughts

Have your say about what you just read! Leave me a comment in the box below. Please note that while I strive to present the information as accurately as possible I am aware that there may be errors. If you have potential corrections the help is greatly appreciated.

Top Of Page

› B32-8